Blog

Water Heater Repair Wichita Blog

Our blog is designed to give homeowners as much information on general plumbing repair tips, not just Wichita water heater repair advice.  Many home plumbing maintenance tasks homeowners can be well equipped  to take care of themselves.  Enjoy!

Water Heater Repair Near Me

Posted by on Jan 4, 2017 in Water Heater Repair Wichita | 0 comments

Are you trying to find a water heater repair near you now? You come to the right website, for we are a prominent repair, replacement and installation business for water heating units in the Wichita area.

It is OK if you are not overly knowledgeable concerning how your water heating device works or what sort of upkeep needs to be performed. We have info on our web site for maintenance and correct care in our blog, and information on our hot water heater replacements here. If your heater is leaking, making odd noises, or otherwise heating water hot enough, give us a call to come evaluate and see why it is not running appropriately.Water Heater Maintenance

Our Water Heater Service Call

When we show up to check the hot water heater, we will have you share all the signs and symptoms you have discovered happening. Do not worry about seeming silly with clarifying exactly what you are seeing, hearing, or noticing with how the hot water heater device is operating. It does not matter if you know the appropriate terms to utilize. We will do a complete assessment to see exactly what is taking place so one may return to ones life immediately. Oh, and our employees are really friendly and go through a comprehensive testing procedure before obtaining hired; and after that, an in-depth training procedure prior to we them go into a customer’s residence. You have absolutely nothing to be afraid with our staff and will be treated with respect at all times.

Correct Water Heater Safety and Upkeep

It is necessary to be familiar with all the safety ideas specified in ones owner’s manual for the hot water heater. One of the most significant dangers is from electrical problems. The heating elements are immersed in water and will deteriorate in time. When this happens, they could short out, perhaps causing electric shock when touching the water storage tank or pipes. This is just one of the main reasons that it is necessary to have an expert repair business near you service ones home appliance every couple of years, to help ensure it is performing safely. The majority of house owners are not extremely experienced concerning power and its appropriate steps for handling it securely.

Despite the fact that hot water heater do not require a great deal of upkeep, the care that they do call for is very important for their overall safety and efficiency. They are just one of a house’s most hazardous home appliances still. When doubtful about what to do, it is always best to get in contact with an expert hot water heater repair company near you, like us.

Proper Water Heater Temperature Settings

Posted by on Mar 1, 2014 in Water Heater Repair Wichita | 0 comments

Much has been debated over what is an optimal water heater temperature setting. Numerous sources, including ENERGY STAR, provide the energy saving factors of temperatures of 120 degrees or lower. And yes, there are savings to be had, however realistically for those whose present setting is closer to the typical factory preset temperature of 140 degrees.

Conversely, fewer share details about the possibility of contracting Legionella bacteria with a lower setting, particularly with a temperature lower than 120 degrees. OSHA states some exceptional safety measures for avoiding this.

Water Heater Repair Wichita’s conclusions are that it is something that each household should weigh in terms of potential health concerns primarily. For those with kids or with elderly people in the home, a higher setting can be a water scalding issue. Alternatively, those vulnerable to contracting respiratory infections, a higher setting ought to be used.

Here is an infographic highlighting the various temperature level growth ranges of Legionella.

Water Heater Repair Wichita

Wichita 10 Minute Water Heater Maintenance Check

Posted by on Feb 26, 2014 in Water Heater Repair Wichita | 0 comments

We are going to put you to work today, but only for about 10 minutes. Yep, that’s all it will take for these 2 important water heater maintenance jobs; however, Water Heater Repair Wichita understands they will do an outstanding job of assisting with three things:

  • Having your water heater last as long as possible (that will conserve you cash).
  • Making sure the water heater runs securely (we do not desire it to explode).
  • Having it run as energy efficiently as possible (also saving you money).

So with that in mind, are you all set to invest 10 minutes once or twice a year to assist in saving some cash? Water Heater Repair Wichita KS thought so.

Testing the T&P Relief Valve

Commonly called the T&P Valve, or the temperature and pressure relief valve, has a vital job. It helps see to it excess pressure does not build up inside the water storage tank, or in much more easy terms, it ensures the water heater does not explode. As the picture shows, it has a lever or little handle on it. All you have to do is raise it part way and then release it. Ideally, it snapped back to its shut position quickly. If it is working properly, a little water can be heard entering into the drain pipe below the lever you just raised and you possibly heard some pressure being released. If none of these things have actually taken place throughout the test, the valve will have to be changed.

As inspectapedia.com states: “dripping TP relief valves are unsafe. The hazard is that minerals in the water supply accumulate inside the valve during the passage of hot water through the valve assembly. That accumlation of scale will eventually block operation of the relief valve, causing the relief valve to fail to operate properly if unsafe pressure or temperature occurs in the water heater in the future. The risk, ultimately, is a water heater tank or heating boiler explosion.”  (read more…)

Carry out a Mimi Water Heater Tank Flush

By nature, rust and deterioration will take place inside the water storage tank thanks to the chemical reactions taking place with all the parts inside that are needed to warm the water. We will not get overly technical right here, however it is simple to assist avoid this from happening by doing a flush or draining of all or a portion of the water in the storage tank.

For simply a tiny flush, position a container under the drain valve below the tank. Open the drain valve and fill the bucket with water. Drain at least a couple of gallons of water in all. Let the water sit in the pail for a couple of minutes to settle and examine if there is much that settles to the bottom of the bucket. If there is, if the water heater has not been drained for a long time (or ever), it would be best to do a complete flush of the tank to get as much of the sediment out as possible. You will wish to turn the temperature level dial down and may wish to let the water cool down for about an hour initially so it is not too hot while draining it. Also, it would be simpler to connect a hose to the drain valve and let the water go outside instead of using containers.

If the water looks relatively clean and clear from the mini test you should be all set. When the water heater has a large amount of sediment inside of it, it can make loud popping sounds and it lowers its efficiency too.

Though water heaters are relatively upkeep free and easy to operate, any time you feel the smallest uncomfortable or are unsure of what to do, it is always best to have a plumbing professional assist with the situation.

 Water Heater Repair Wichita

Correct Water Heater Venting Methods

Posted by on Feb 18, 2014 in Gas Water Heater Repair Wichita, Water Heater Repair Wichita, Water Heater Replacement Wichita | 0 comments

Water Heater Repair Wichita is talking about the following ideas about proper water heater venting for property owners to have a general understanding of how the different types of venting work. They are not intended to be how-to directions for residents to perform themselves. The training and licensing of an expert plumbing repair service technician is always extremely important.Water Heater Repair Wichita

As far as gas water heaters go, there are two popular venting choices: direct vent water heaters and power vent water heaters. Depending on which type of system one uses will depend upon the direction the vent is installed from the water heater to the outdoors so the damaging gases produced from the water heater’s burner are not launched inside the house, but rather sent into the outside environment. You might have heard the term atmospheric water heater while taking a look at different types of sorts of water heaters. Also, air requires to be sent into the water heater for combustion to take location.

This video gives some tasks to perform to help see if your water heater is currently properly vented:

Direct Vent Water Heaters
It is best if the air needed for combustion is from outside the home in order to reduce the threat of fires from the combustible vapors of the water heater. The air from outside the home will either be vented through a wall or the roof of the home. Direct vent systems will assist resolve the concern of not having enough indoor ventilation by drawing in air from outside your house.

The basic principles of a direct vent water heater is that the heat produced from the burning of fuel is used to warm the water in the tank. The exhaust gases are then vented outside the house. Considering that warm air is lighter than cool air, the exhaust gases will normally increase and head out through the venting system. The optimal scenario is to have the vent pipes be installed to go vertically out from the water heater, without any demand of any type of blower to help push the gases out. One still needs to be mindful about backdrafting, which is when the exhaust fumes enter back into the house rather than escaping through the vent to the exterior. Also, traditional atmospherically-vented water heaters are not as energy efficient as other more current types that do not permit as much of the warm air produced to escape up through the vent pipes.

Within the category of direct vent water heaters there are different types of kinds we will not go into now, that can have different types of venting choices, like having a single or dual vent channel. Nevertheless, there are times when a blower is needed to help with the removal of the gases, which leads this conversation to power vent water heaters.

The following video explains in more detail the details of a direct vent system:

Power Vent Water Heaters
As can be assumed from above, power vent water heaters have a fan or blower connected to help with the removal of exhaust gases from the hot water heater. There are times that a water heater can not be set up where it is easy to install a vertical vent or chimney. Because a fan is used for eliminating the exhaust gases, the vent pipes can be installed either horizontally or vertically, or a combination of both.

The primary advantage then for power venting is that ones water heater can be set up practically throughout the home. An additional advantage is that normally PVC pipes can be used for the ventilation because the blower will cool the exhaust air enough that it will not be too hot for the PVC pipe to deal with.

Some disadvantages with a power vent system is that it might cost some to at first set up if the existing venting system is not in place. And, the equipment cost of the blower (though not that pricey) and if one needs to install a power outlet within six feet of the water heater’s position. It will use some electric power to run the blower however that likewise is not a big expenditure. Lastly, the blowers, relying on the kind, run relatively silently, but some residents do not like the additional ambient noise it makes. With the proper setup Water Heater Repair Wichita can assist minimize the noise of the blower within the house.

In conclusion, there are a reasonable quantity of differences between direct and power vented water heaters. We recommend having a look at the ENERGY STAR information here too in regards to the various energy efficiency scores for the various kinds of heaters. In terms of which one is finest for your house should be chosen upon with an expert water heater replacement business.

Are Tankless Water Heaters Practical

Posted by on Jan 28, 2014 in Tankless Water Heater Repair Wichita, Water Heater Repair Wichita | 0 comments

There is a great deal of talk about the advantages and disadvantages of tankless water heaters verses tank water heaters. Water Heater Repair Wichita is going to start a discussion on tankless heaters today, pointing out some of the claims and going over the realities. They have advantages and downsides over standard water heaters and it could just depend on what ones certain usage needs are that will determine which kind of the appropriate one for ones house.Water Heater Repair Wichita

The basic concept of making use of a tankless water heater is one of being energy efficient. Water is heated as it is utilized, and not saved in the large tank of a conventional water heater, regularly warmed so it is prepared whenever it is to be used. Likewise, considering that they can hold on the wall and take up essentially no space at all, they are extremely practical.

Electrical Usage

Considering that tankless water heaters do need 240 volts of electricity and as much as 160 amps to establish, one might need to have ones electrical box upgraded to accommodate the power demand of the system. For example, and not to obtain extremely technical here, a conventional tank water heater has around a 4500 watt heating element, verses 4, 7000 watt elements of a whole-house tankless one.

As for efficiency, According to the Partnership for Advancing Technology in Housing (PATH), and supported by Housing and Urban Development (HUD), “further testing is needed to determine if electric tankless water heaters will match the efficiency of tank-type heaters.”

Proper Sizing

Tankless systems are sized by the flow rate determined in gallons per minute (GPM). One will require to identify when and what ones highest demand of hot water is to properly identify the very best size system to purchase.

Here is the formula for figuring this out from Keltec Inc:

Flow rate (GPM)
Temperature rise ( T ºF)

Water Heater Repair Wichita KS

To determine the size and kilowatt rating you need, apply this formula:
“The result of this formula is the maximum kW needed to accomplish your project requirements for on-demand heated water. Other media will vary slightly. This formula is a nearly universal method of calculation for energy input to yield temperature at required water flow.”

Water Quality on the Tankless System

The quality of the water one has at home needs to be analyzed also in order to get the most from a tankless water heater. If ones water is high in mineral material, like calcium, they will develop on the coils in time and lower the life expectancy of the device. If the water hardness at ones house is above 11 grains per gallon, a water softener would be recommended. Makers do have de-liming directions and typically have a caution light on the system to recognize when this should be carried out. Nonetheless, remember what the producers guarantee covers. If it is simply against maker’s defect, this will not cover any repairs needed due to ones water quality. In optimal conditions, a tankless system will last much longer than a traditional water heater, which can help justify the higher preliminary product expense and setup costs, however one will have to be conscious of keeping it running properly to earn back ones financial investment.

Service and Repair Costs

These costs are typically greater for a tankless system than a traditional water heater, just to have a heads up. Many people normally do not have their standard water heater services too routinely (sadly) however it is advised to have a tankless system professionally serviced once a year.

Instantaneous Hot Water

This ought to not be that big of a deal, however though producers do advertise instantaneous hot water. Clearly one recognized that it takes a moment for the hot water being heated immediately to go through ones hot water pipe to the faucet or shower. Though, if one is simply turning on the faucet a little the tankless heater’s burner might not ignite if the faucet is not opened up more. As an example, a flow rate of one-half gallons to 2 gallons per minute is needed for electric tankless heaters to heat water.

Depending upon the amount of hot water one requires at the same time, more than one system will have to be installed. This is easy to do, however certainly increases the equipment costs at the same time.

Devices and Set Up Costs

An average cost range for tankless heaters is around $800 to $1200. A common tank water heater it is around $300 to $500. Set up expenses are about $1200 and $300 respectively then too. One will, again, most likely need an electrical upgrade, along with a different gas pipe setup (if utilizing a gas tankless heater), and a new ventilation system. A benefit of changing ones water heater with a system similar to the existing one is most of these upgrades will not be needed – they are already in place.

Advantages of Going Tankless

No stored water, which in itself has a number of benefits. Initially, if there was to be a leak with a tank heater, there can potentially be water damage to ones home. Also, one must flush the tank a minimum of when a year to keep mineral build up reduced, however there is the potential for stinky water smells, bad tasting water, and the growth of legionella bacteria in the storage tank if it is not at a adequate temperature. Standard water heaters take up a lot more space also.

Efficiency

Here is what Consumer Reports has found: “Gas tankless water heaters, which use high-powered burners to quickly heat water as it runs through a heat exchanger, were 22 percent more energy efficient on average than the gas-fired storage-tank models in our tests. That translates into a savings of around $70 to $80 per year, based on 2008 national energy costs. But because they cost much more than storage water heaters, it can take up to 22 years to break even longer than the 20-year life of many models. Moreover, our online poll of 1,200 readers revealed wide variations in installation costs, energy savings, and satisfaction.”

The Center for Energy and Environment says that “A 37% savings of water heating energy per household was found for replacing a typical natural draft storage water heater with a tankless one. However, this savings was not enough to offset the high incremental cost resulting in paybacks from 20 to 40 years.”

Finally, the National Rural Electric Cooperative Association concludes that “Tankless water heaters generally aren’t as energy efficient as well-kept tank water heaters. Insulation, temperature setback, timers, and heat traps can all lower energy costs with tank water heaters.”

One point to weigh is that yes, tankless systems will utilize less gas than a conventional gas water heater which does have its ecological benefits. However, a lot of electrical energy is utilized, for electricity takes longer to heat up water than gas. And, most electrical energy is produced from burning nonrenewable fuel sources.

Conclusions

Similar to any kind of innovation, the field of water heating is ever developing. Efficiency advances are happening with conventional gas and specifically electric storage tank water heaters. There are various benefits with tankless and standard heaters that one will should think about. Do not hesitate to let Water Heater Repair Wichita know of any questions you might have in the choice procedure.

Check out our page on tankless heater repairs too!

Why is My Wichita Water Heater Making Noise

Posted by on Jan 13, 2014 in Water Heater Repair Wichita | 0 comments

Water heaters aren’t known to make too much noise when they are operating, so it can be worrying when one begins to hear popping, banging or rumbling sounds originating from the system. Today Water Heater Repair Wichita is going to speak about the most typical reason your water heater may begin making banging and what one can do to quiet it down!

Water Heater Repair Wichita

Water heater (Photo credit: km6xo)

The most likely reason your water heater is making sound

The most likely description behind your water heating making banging is that sediment has built up on the bottom of your tank. This sediment is normally made up of calcium and magnesium deposits from your tap water, and it’s specifically common in homes that have hard water.

When sediment develops up at the bottom of your water heater’s tank, it traps some hot water under it. As this takes place, hot water bubbles start to form and break through the sediment. This commonly results in a “popping” sound that is heard regularly while your water heater is running.

In addition, the sediment itself might be liable for numerous water heater noises. That’s since the sediment is close to your water heater’s burning elements, which triggers it to burn up and make numerous unusual noises. As water flows through the water heater, sediment can also break away from the bottom and bang against the sides of the tank.

How to stop your water heater from making banging

If your water heater is making sound because of sediment buildup, the first thing one need to do is to have it assessed for an apparent cause. Water Heater Repair Wichita KS can do this for you and if sediment buildup is the culprit, we can flush the water heater tank or recommend another option to fix the trouble.

There are likewise a few things you can do to prevent sediment from developing inside the storage tank in the first place. The first is to make sure you receive expert upkeep done on your water heater once annually. During maintenance, we’ll flush your tank and eliminate any sediment that has built up since the last maintenance appointment.

An additional fantastic choice is to set up a water softener in your house. A water softener eliminates minerals from your water prior to they can enter the water heater, which can considerably reduce sediment accumulation inside the storage tank.

If you have any concerns about your water heater making banging provide us a call today.

Enhanced by Zemanta

Water Heater Safety Precautions

Posted by on Dec 3, 2013 in Water Heater Repair Wichita | 0 comments

Effectively preserving ones water heater is important not so it works to its full potential and can save some energy cash, however for safety issues too. Yes, it can blow up – it doesn’t take place too commonly for residents, however clearly this is something that Water Heater Repair Wichita doesn’t wish to have take place to you!

Vents
Venting can be kind of technical but we will go over the essentials below. The vent must be the exact same diameter as the draft diverter of the water heater tank. It is expected to go up and out (for atmospherically vented heaters). Not other directs like up, down, up and out. For direct-vent water heaters, the vent need to go out a side wall. As for power-vent heaters, the fan blows the fumes out, so there is some flexibility in the instructions they are vented.

Any roofing or wall that the vent goes through ought to be a double wall. The single wall pass throughs ought to be screwed with 3 screws per section. If these fundamentals are not adhered to, the vents can fall apart gradually and carbon monoxide can cause major issues within ones home. Naturally we don’t desire that to take place!

The only other issue with ventilation is that of backdrafting. The fumes can eat the vents with acid condensation. If plenty of this gets on cold piping and the water heater it will not be a great situation for a correctly working water heater. If the fumes go back inside the instead of being appropriately vented outside, the fumes can enter the living locations of the home. Soot troubles can emerge too.

Dielectric Connectors
The steel water heater is linked to cooper pipes by the dielectric connectors. When two these two metals are assembled in water electrolysis occurs. The process corrodes one metal away to secure the other. This process is vital in safeguarding the inside of the water heater. Assessment for leaks ought to be done where the connections are made.

Temperature and Pressure Relief Valve
This is kinda of an essential part of the water heater, for it helps see to it the darn thing does not explode under pressure if the temperature level exceeds the appropriate limitations the water heater is designed for. Once a year (at least) the T&P valve should be checked to ensure, it is working properly, for they can be susceptible to failure. Simply pulling up on the handle water needs to flow easily out and stop when the handle is released. If it simply runs or trickles, or does nothing at all, it will should be replaced.

The drain lines for the T&P line ought to not be directed up, because water doesn’t stream uphill too well. Make sure it goes down and or out please. If water is running out the drain line regularly, it is the sign of something wrong too. It can be one of a number of various things that we will not go into right here – just speak to a neighborhood plumber please.

Earthquake Straps
Yep, even if you don’t live in an earthquake zone and are required to have these on ones water heater, it is a pretty good idea to do so. It appears like most all new homes in sub-divisions these days have the water heater in the garage. Yes, there is normally a concrete curb in front of it so one does not drive an automobile into it, but things can inadvertently knock it over so be safe and strap that say thanks to in.

Temperature Level Setting
It appears most domestic water heater tanks have setups of warm – hot – extremely hot … and not degree markings. Some “ideas” on conserving energy at home particularly in the winter season time, say to decrease the setting on the tank to 120 degrees. That’s significant for saving energy however legionella microorganisms, which triggers Legionnaire’s disease can expand at 120 degrees. By breathing in the mist from the water in the shower, one can inhale the microorganisms. Look for a medium in between 130 and 120 degrees. Above 130 degrees is technically a scalding temperature so be careful.

Anode Rods
These typically are made from aluminum and there is nothing incorrect with that in theory, though we suggest utilizing magnesium ones. Let’s state for whatever reason there is some sort of emergency or disaster where one lives and one had to make use of the water in the water heater for drinking water (because great deals of emergency preparedness people recommend doing this). The water that comes out of the drain valve is the water at the bottom of the tank. If one has aluminum anodes, that water will be laden with aluminum compounds, which is not great for the human body. It is bad for the stomach, intestines and joints.

The anodes aid with rust defense and are essential in lengthening the life of the water heater. They can also aid with smell troubles with the water. Overall, magnesium anodes simply work better for lots of different reasons like the health advantages, let build up of sediment, a quieter water heater, and they often work better with softened water.

Drain Valve
Ok, simply check it a minimum of yearly to ensure the darn thing opens and works. And it is great to drain and purge the tank at least once a year anyhow (something you obviously are doing already). If for some reason one requires to make use of the water during a disaster or drain it to rather a loud tank and have not drained it frequently, and it does not open, it will take longer to fix the trouble you are at first attempting to repair.

Combustion Changer Hatch
Given that gas and oil water heaters breathe the air drawn in from below, combust with it and exhale it, it is necessary to keep the area around it, specifically below the water heater, clean and swept. If if is not burning properly, it can cause drafting issues (discussed above), as well as combustion and fume issues and potentially be a fire threat. A few of examining the chamber and how the flame burns is objective so we are not going to enter a lot of information here. it is very important to see if the combustion chamber roof has a great deal of rust or water markings or is black in color. These are not an excellent indication at all. One ought to see some blue flame at the bottom when it burns and orange and yellow at the top, however, the yellow ought to not be super high up. One need to see grey metal, some white condensation marks are ok.

We have put together an infographic to highlight the information above:

Water Heater Repair Wichita

Enhanced by Zemanta